1 right angle through-hole plug and socket dy jh series subminiature connector j series jh series type a right angle through-hole plug 3a with grounding adapters with a spring lock device h: height of the lock screw block (for types a, b & j) rohs compliance this product displays (lf)(sn) on a label. note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a gold- plated (flash) receptacle with hexagonal lock screw blocks having a no. 4-40unc inch thread and with grounding adapters having a spring lock device is required, specify the model number as jhey-9p-1a3a. with hexagonal lock screw blocks (h: 6.3mm) having a no.4-40unc inch thread no.4-40unc q ty / box circuits model no. gold-plated 0.76micron jhey-9p-1a**14 jhby-25p-1a**14 gold-plated (flash) plug jhey-9p-1a** jhby-25p-1a** " # $ % dimensions (mm) & 12.55 a b c 8.35 2.84 2.8 0.7 25-circuits 9-circuits % ) 9-circuits 25-circuits 10 & right angle through-hole plug and socket right angle through-hole plug (with hexagonal lock screw blocks) right angle through-hole socket (without lock screw blocks, but with grounding adapters having a no.4-40unc inch thread) features ? the depth is trimmed to 8.5mm, reducing the surface mounting area by 33% compared with our j series subminiature connectors. ?the weight of the jh series is 10% lighter than our j series. ? ejh series d subminiature connectors with noise filters are available. 0 1
2 d subminiature connector jh series m2.6 m3 type b type f type g type h type j 3b 3f with hexagonal lock screw blocks (h: 6.3mm) having an m2.6 thread *1: no.4-40unc inch thread *2: model number hfs-4s-( )1w(m) without lock screw blocks f, g, h: grounding adapters have a thread (*1) for securing separately- purchased lock screw blocks (*2) with hexagonal lock screw blocks (h: 6.3mm) having an m3 thread 3g *1: m2.6 thread *2: model number hfs-2.6s-( )1w(m) 3h *1: m3 thread *2: model number hfs-3s-( )1w(m) 3j part name material and finish contact insulator shell hexagonal lock screw block grounding adapter with spring lock device brass, nickel-undercoated, mating part; gold-plated solder teil; tin-plated (reflow treatment) phosphor bronze, nickel-undercoated, mating part; gold-plated solder teil; tin-plated (reflow treatment) glass-filled pbt, ul94v-0, black steel, copper-undercoated, nickel-plated steel, copper-undercoated, nickel-plated brass, nickel-undercoated, tin/copper alloy-plated plug socket 3a ac, dc 250v ac, dc - 40?c to + 85?c (including temperature rise in applying electrical current) 5,000m min. 1,000v ac/minute 1.6mm initial value/15m max. after environmental testing/30m max. current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage applicable pc board thickness ?series name ?shell size: e, b ?wire connection type: y ... right angle through-hole type ?number of circuits: 9.25 ?connector type: p ... plug, s ... socket ?connector construction/dimensions: standard of the jh series right angle through-hole type ?types of grounding adapter: 3 ... with grounding adapters having a spring lock device ?type of lock screw block: a ... with hexagonal lock screw blocks having a no. 4-40unc inch thread b ... with hexagonal lock screw blocks having an m2.6 thread f ... without lock screw blocks, but with grounding adapters having a no.4-40unc inch thread g ... without lock screw blocks, but with grounding adapters having an m2.6 thread h ... without lock screw blocks, but with grounding adapters having an m3 thread j ... with hexagonal lock screw blocks having an m3 thread ?finish of mating part blank ... gold-plated (flash) 12 ... 0.2micron gold-plated 13 ... 0.4micron gold-plated 14 ... 0.76micron gold-plated jh b y 25 p 1a 3 f 14 m2.6 no.4-40unc m3 specifications materials characteristics model number identification note: contact jst for special plating requirements. note: contact jst for details. * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812
3 d subminiature connector jh series no.4-40unc type a right angle through-hole socket 3a with grounding adapters with a spring lock device rohs compliance this product displays (lf)(sn) on a label. note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a 9-circ uit gold-plated (flash) socket with hexagonal lock screw blocks having a no. 4-40unc inch thread and with grounding adapters having a spring lock device is required, specify the model number as jhey-9s-1a3a. with hexagonal lock screw blocks (h: 6.3mm) having a no.4-40unc inch thread pc board edge max. y ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? a 12.55 0.7 7.9 ) & % b c 2.84 2.8 10 3.10 9-circuits 25-circuits jhey-9s-1a** jhey-9s-1a**14 jhby-25s-1a** jhby-25s-1a**14 q ty / box circuits model no. gold-plated [0.76micron] socket gold-plated (flash) socket " # $ % dimensions (mm) & h: height of the lock screw block (for types a, b & j) pc board layout (viewed from component side) note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details.
4 d subminiature connector jh series m2.6 m3 type b type f type g type h type j 3b 3f with hexagonal lock screw blocks (h: 6.3mm) having an m2.6 thread *1: no.4-40unc inch thread *2: model number hfs-4s-( )1w(m) without lock screw blocks f, g, h: grounding adapters have a thread (*1) for securing separately- purchased lock screw blocks (*2) with hexagonal lock screw blocks (h: 6.3mm) having an m3 thread 3g *1: m2.6 thread *2: model number hfs-2.6s-( )1w(m) 3h *1: m3 thread *2: model number hfs-3s-( )1w(m) 3j 10 3 12.0 42.6 47.04 ? no.4-40unc m2.6 m3 panel layout note: the dimensions above should serve as a guideline. contact jst for details.
no.4-40unc no.4-40unc 4.78 no.4-40unc l h l h j series right angle through- hole type jk series straight through- hole type jk series right angle through- hole type j series straight through- hole type jh series right angle through- hole type kh series right angle through- hole type applicable series dimension h (mm) type attachment q'ty / box jfs-4s-c1n jfs-4s-b1w jfs-4s-c1w jfs-4s-b1wm jfs-4s-c1wm kfs-4s-c1n kfs-4s-b1w kfs-4s-c1w kfs-4s-b1wm kfs-4s-c1wm hfs-4s-b1w hfs-4s-c1w hfs-4s-b1wm hfs-4s-c1wm " # spring washer .. 1 pc. nut ............ 1 pc.
spring washer .. 1 pc. hexagonal lock screw & spring washer are integrated sfs-4s-b1w sfs-4s-c1w sfs-4s-b1wm sfs-4s-c1wm dimension / model no. dimension l (mm) model no. m3 m3 l h 4.78 m3 l h j series right angle through- hole type jk series straight through- hole type jk series right angle through- hole type j series straight through- hole type jh series right angle through- hole type kh series right angle through- hole type applicable series dimension / model no. dimension l (mm) model no. dimension h (mm) type attachment q'ty / box jfs-3s-c1n jfs-3s-b1w jfs-3s-c1w jfs-3s-b1wm jfs-3s-c1wm kfs-3s-c1n kfs-3s-b1w kfs-3s-c1w kfs-3s-b1wm kfs-3s-c1wm hfs-3s-b1w hfs-3s-c1w hfs-3s-b1wm hfs-3s-c1wm " # spring washer .. 1 pc. nut ............ 1 pc.
spring washer .. 1 pc. hexagonal lock screw & spring washer are integrated sfs-3s-b1w sfs-3s-c1w sfs-3s-b1wm sfs-3s-c1wm accessories/lock screw block dyy j jh jk & kh series subminiature connector 1 a varietly of accessories are available for the d subminiature connectors. hexagonal lock screw block (metric thread: m3) type a type b hexagonal lock screw block (inch thread: no.4-40unc) rohs compliance lock screw block type a type b rohs compliance
2 d subminiature connector j jh jk & kh series m2.6 m2.6 l h 4.78 m2.6 l h j series right angle through- hole type jk series straight through- hole type jk series right angle through- hole type j series straight through- hole type jh series right angle through- hole type kh series right angle through- hole type applicable series dimension h (mm) type attachment q ty / box jfs-2.6s-c1n jfs-2.6s-b1w jfs-2.6s-c1w jfs-2.6s-b1wm jfs-2.6s-c1wm kfs-2.6s-c1n kfs-2.6s-b1w kfs-2.6s-c1w kfs-2.6s-b1wm kfs-2.6s-c1wm hfs-2.6s-b1w hfs-2.6s-c1w hfs-2.6s-b1wm hfs-2.6s-c1wm " # spring washer .. 1 pc. nut ............ 1 pc.
spring washer .. 1 pc. hexagonal lock screw & spring washer are integrated sfs-2.6s-b1w sfs-2.6s-c1w sfs-2.6s-b1wm sfs-2.6s-c1wm dimension / model no. dimension l (mm) model no. 1.2 1.0 6.1 6.2 1.0 12.5 m2.6 model no. q ty / box attachment jfs-2.6r-n spring washer ?1 pc. set screw ?1 pc.
hexagonal lock screw block (metric thread: m2.6) rectangular lock screw block (metric thread: m2.6) type a type b rohs compliance rohs compliance
d subminiature connector j jh jk & kh series total dimension 6.2 height of lock screw block 4.8 panel thickness 0.8 spring washer thickness 0.6 connector flange grounding adapter with threads pc board j k dces jst 18.0 9.6 6.6 j k dces-1 jst 18.0 9.6 7.4 25.0 33.0 3.0 circuits j series jk series q ty / box material model no. type j-dces j-dces-1 " # pa, ul94v-0, black
applicable connector model no. j series jk series plug receptacle dej-0.3 kej-0.7 kej-0.4 3 application examples of hexagonal lock screw blocks ?the resulting total dimension from the connector flange to the top of the hexagonal lock screw block must be 6.2mm after assembly. ?the d subminiature connector can be installed on the panel by simply tightening the hexagonal lock screw block together with grounding adapter, which has an identical thread to that of the f, g, and h types. with this tool, contacts (connected to wires by crimping) can be easily removed if they are improperly inserted into plug and receptacle housings. type a type b rohs compliance dust cover (for receptacles) extraction tool
|
